Friday, 20 May 2016

What to see in a Climate vacuum test chamber?

Climate vacuum testchamber is also termed as environmental chamber and it deals with the testing of the climatic effects in an accurate manner. Environmental conditions might affect different kinds of items like electronic devices, biological products, industrial products and many more.
Some of the major conditions that can be tested in these chambers are altitude, extreme and sudden thermal shock, extreme temperatures, relative humidity, electromagnetic radiations, electrodynamic vibrations, salt spray, corrosion resting, weathering, rain, vacuum, Sun exposure leading to UV degradation and others.

What are the major aspects to be focussed?

·         Climate vacuum test chamber can be of varied types and thus you have to check out the types first for choosing the best one.
·         Test standards need to be considered in this respect so that the function of testing can be conducted in a peaceful manner without any kind of interruption or inconveniences.
·         Do not choose any complex design of the test chamber otherwise there will be a great trouble in conducting the test smoothly.
·         Control options are to be checked for sure so that the testing techniques can be regulated with care. Necessary alterations or adjustment can be made in order to make the options more flexible.
·         These test chambers can be easily programmed as a result of which your requirements can be fulfilled and on the other hand higher accuracy can be maintained.

·         You can now get proper reports of the tests and these reports also include after-effects of climate. 

Monday, 9 May 2016

What you need to consider while buying the testing instruments




In today’s world, perfection is an essential element that can make or break your business. Especially, when you are dealing with the products needing precision in the job then the necessity for top quality instruments is even more. So in these circumstances, you should resort to the testing equipment that can give your products perfection and high level of accuracy. But how you will know that the testing equipment that is getting used in your facility is of top quality? To select only the quality testing instruments, you need to know a few things about them.

Considerations before purchasing the testing and measuring equipment
 
Before buying the instruments measurement testing, you should check a few things so that your objective will be fulfilled:


  •  Trust only the brand names in case of testing and measuring equipment. In this way, you can get the best products that can give better productivity and accurate results.

  • The equipment that you buy must have passed the Rockwell hardness testmethod and various other testing methods which deemed necessary to give the equipment a stamp of quality.

  •  Check whether the products that buy come with a warranty period or not. If there is no warranty then it’s better to go for a different brand.

·         Other than searching for products on the brick and mortar stores, it is better for you if you can search them online so that you can check the products and compare the features and prices of them. Besides, in the online stores you can get the customers’ reviews where you get to know which one is best and which not.

Thursday, 28 April 2016

Two Most Essential types of Quality Testing Instruments

Testing the quality and measuring the levels of performance is one of the industry norms. Irrespective of whether it is a hardware manufacturing industry, or any small time product manufacturing company, there is always the need for quality testing instruments. These instruments are calibrated on several levels to perform reliable testing in real time working conditions and produce efficient results.

Start with the temperature test chamber! This special type of testing chamber is designed to test not just the temperature levels in a controlled environment, but also the levels of humidity. The instrument is designed to operate under different types of temperature conditions, and the records are maintained consistently. These test chambers suit the environmental needs within a given framework. The test chambers for humidity and temperature measurement come in different sizes and exclusively put in use for steady-state stability testing, basic temperature cycling as well as accelerated stress testing. The temperature test equipment is designed to meet customized needs and specifically standardized testing needs.

The state of the art photo stability chambers are designed for quick and reliable photostability testing. The results of testing are quite dependable, or precisely accurate. These special categories of stability testing chambers are specifically used in agriculture based industries, tissue culture techniques and several photo chromatic organizations. These instruments regulate and maintain environmental conditions, besides providing the door operating illumination system that uses fluorescent lights as the base.


Check out online to find the most appropriate type of quality testing instrument around, and give the buyers’ confidence. 

Monday, 18 April 2016

Know the use of chambers to test gas warning providers

What is gas warning system?
The gas warning system is a lifesaving system that monitors the atmosphere within any enclosed space. As the gas that is being monitored gets increased above a preset threshold level, an acoustic alarm is triggered, so that the caretaker of this monitor can look into the matter.
The chambers used to test the devices of gas warning are built and operated differently. The basic work of gas warning devices is to alarm you is to give you an alarm if there is any gas leakage in the system. They can be used for domestic usages too. In that case, usage of gas is also reduced. The works that the device will be doing for you are all specifying the risks that are affiliated with. So, the testing part is even more critical. A vacuum high-pressure test chamber is usually designed for the purpose.

The style of operation
Before moving to any other thing, it is important to understand the parameters that the testing device will be checking. In the case of the devices providing a gas warning, there are three issues to be checked.
·         Temperature
·         Pressure, and
·         Humidity
The parameters are changed in all the tests. It is to be noted that only one parameter is to be changed in a single test, where other two will remain constant. This is to ensure that the device is reading the values for all the alterations separately. The test is to be carried out in a synthetic atmosphere. After it is tested in the synthetic air, the same test has to be pursued in an atmosphere of fuel gas. The quantity or the density of the gas in the cold heat climate vacuum must be as per the norms. Both the tests will be showing the signal that the gas device will show at the end.

The signals received, according to the change of parameters are recorded and expressed in the form of a graph. The output is usually stored in the form of data in carriers. The components that are used in the test are made of stainless steel. It has to be noticed that silicon never comes in contact with any of the test elements. It will totally destroy the specimen.

Controlling the test

The test is controlled through a PC. The software is installed to run the setup. It has to be mounted on a controller named as STRANGE. The door of the cold heat climate vacuum test chamber will be opening and closing in a pneumatic frequency. While the door will be opened, the external illuminations will turn on. For the support of the test, the chamber is fixed to the bottom. However, to move the chamber at the middle, there are castor wheels attached. 
-----------------------------------------------------------------------------------------------------------------------

How climatic test chambers operate?

Humidity and temperature are the best testing parameters for climatic test chambers. If you want to know more about these test chambers, then you got to acquire detailed knowledge on application, operation mode and test sequence.

Both cold and heat can be tested within these test chambers so that the accurate intensity can be known. The structure and temperature of these test chambers are quite flexible and thus, the operators will face no trouble in operating the tests within the chambers.

Testing parameters are also efficiently maintained in this case so that accurate testing results can be produced along with the invitation of flexible operation by curtailing unwanted mistakes.

Highlighting aspects of these test chambers

·         Airbag modules are being used so that they can be tested within climatic test chambers. Both dashboard and steering wheel are included so that the testing parameters can be used in beneficial manner.
·         Cameras and external illuminations need to be switched on so that the test sequences can be properly conducted without any kind of interference or interruptions.  In this case, the temperature needs to be controlled so that the testing function can be conducted in an efficient manner.


·         Specialized mats are being used so that the doors of the concerned chamber can neither be closed nor be closed. The set-up of test specimen is being mounted over a plate so that the test functions can be highly facilitated. Nowadays, only cambered doors are getting used for conducting the testing activity smoothly and conveniently. 

Friday, 8 April 2016

What are the handy features of a dust test chamber?

Dust test chamber is mainly suitable for testing the sealing performance of home components or the housing of products. It is basically employed in the two grades of test like the IP5X and the IP6X. Such a test is prescribed by the housing protection grade standard. It can test the functioning and efficacy of components under extreme environments. The test duration and the dust used determine the standard of the test. The very formation of dust in test space gets impacted by the compressed air injection via the nozzles. To get the best test results, you need to look for certain features.

Well designed and user friendliness!

The air channel must be comprised of quality material like the high quality stainless steel. The air channel bottom may be connected to conical hopper interface, the air outlet and the inlet should lead towards the air channel. There must be the well made working top or room to be connected with the inside of the room, formulating the ‘O’ Shape. Hence, the air can flow smoothly and it may help in diffusing the dust to a great extent.

Is it important to buy dust test chamber with smart touch screen?

While purchasing the dust test chamber, consider buying the one with touchscreen. The touch screen chamber will perform automatically and will have the handwritten function. Choose the one with intuitionist operation, elegant and graceful appearance and that which is easy to use.

The need for proper temperature air circulation!

If the entire air channel is made up of stainless steel, the air channel bottom is connected to the cone hopper, the air inlet and outlet is attached to the cone hopper, the dust will diffuse evenly and to the greatest extent.


Dust test chamber is used to perform dust test and to test the functioning of the components under different climatic conditions. The test duration and the actual composition of the dust will be indicated. 

Wednesday, 6 April 2016

Stability test chambers at discounted rates!

Stability test chambers are superb enclosures used to test the vaccines, drugs and several other products in order know their stability, constancy and the shelf life. Used widely in the pharmaceutical industries, stability test chambers may even be employed to test humidity, the temperature ranges. Such enclosures can be acquired from Quantum Technologies Global, your one-stop destination for the stability test chambers. Our test chambers are developed as the consequence of intensive R &D and a complete confirmation with the international standards.

Our services!
·         Calibration
·         Validation
·         Compliance IQ and OQ
·         PQ Protocols.

The chambers are developed to execute stability and the shelf list test on the drug substances.

Features of our devices!
Our test chambers incorporate the programmable alarms and the display screen allowing constant monitoring of the devices for any kind of fluctuation in parameters like temperature. Our enclosures are amazingly energy efficient, reliable and comprise of the sturdy construction. The interiors and the exteriors are corrosion resistant and hence our enclosures are sure to last for decades.

Why us?

From us, you can avail the stability chambers at discounted rates. The devices are available both in the standard models and customized models as per the needs of our clients. In fact, Quantum Technologies Global is the leading manufacturer of all the lab equipments that are used in various applications like quality testing, reliability testing, in the sedimentation and the centrifugal forces, in power coating, etc. Get in touch with our professionals immediately to acquire such stability test chambers.